HOW TO MAKE A NO-SEW PINCH PLEAT CURTAIN – BREPURPOSED

After I began planning for our laundry room replace, I knew I wanted an answer for hiding all our sneakers beneath the bench. I used to be consistently lining them up and making an attempt to maintain them organized and it all the time simply appeared like a sizzling mess. I really like the look of a sink skirt and thought it might be tremendous cute to make a shoe skirt! So I set to work on making my very own no-sew pinch pleat curtain to cover all our sneakers!

Exhibit A: I’m truthfully stunned it took me 7 years to resolve to cowl this up. We use this room SO MUCH and regardless of how laborious I attempted it was unimaginable to maintain the sneakers neat and tidy. I wished one thing that was nonetheless purposeful but in addition fairly and a curtain appeared like a fantastic alternative. It could cover the mess however can be straightforward to tug to the facet and get to our sneakers after we wanted them.

WHY PINCH PLEATS?

Should you take a look at any skilled inside designers work, likelihood is you’ll see pinch pleat curtains. They provide a really tailor-made and opulent look, creating a really excessive finish look. More often than not these curtains are customized made and might value a LOT of cash as a result of they require further cloth, however I used to be rapidly stunned at how straightforward they had been to make myself.

I really do personal a stitching machine nevertheless it’s been a sizzling minute since I used it and by the point I figured all of it out once more I’d in all probability already be executed with this no-sew technique! I’ve used iron-on adhesive earlier than and was tremendous impressed with the outcomes so I used to be prepared to offer it a strive on these curtains.

MATERIALS FOR NO-SEW CURTAINS

I’m so in love with the material I selected for this mission. I found these lovely block print textiles on Etsy and instantly knew I’d be utilizing considered one of them. They remind me of my DIY Block Print Desk Runner I made final yr! As soon as my samples arrived, these this dainty little tulip print was the clear winner. And bonus – I’ve further cloth left over so I feel some pillows is likely to be in my future 😉

HOW TO MAKE A NO-SEW PINCH PLEATT CURTAIN

STEP 1: MEASURE YOUR FABRIC

You need your cloth to be roughly double the size of the completed measurement of your curtain. The way in which the sample went on my cloth, my size was already pre-determined for me and I ended up making 3 curtains complete.

In your peak, I counsel chopping the material a bit of longer than you assume you’ll want. Then when you hem the perimeters and high you may maintain them up and get a greater thought of the place to trim it.

STEP 2: HEM THE SIDES OF YOUR FABRIC

After you have your cloth minimize to measurement, you may hem the perimeters in roughly one inch. Should you’ve by no means used iron-on adhesive earlier than, it’s tremendous straightforward! You merely minimize a bit to the size of your cloth. Fold your cloth over it, after which use your iron to make it stick!

The warmth from the iron melts the adhesive and binds the material collectively. There are totally different manufacturers of adhesive so make sure that to learn the instructions for yours! Mine wanted to be pressed for about 10 seconds a bit on the again. Then I flipped it over and pressed it once more for a number of seconds per part.

The iron-on adhesive created a everlasting bond with out having to stitch! Straightforward peasy!

STEP 3: HEM THE TOP OF YOUR FABRIC

The hem on the high of your cloth goes to be a bit of wider than your sides as a result of that is the place your pleat tape will go. Fold your cloth over and place the pleat tape on high so that you’ve got about 1/4″ house on high and backside (1/2″ complete).

Take away the pleat tape and fold the material again down. Place two strips of adhesive the size of your cloth, fold the material over it and iron it down.

STEP 4: IRON ON YOUR PLEAT TAPE

To connect the pleat tape do the identical factor as above, inserting two strips of adhesive over your seam. Place the pleat tape on high and iron it in place.

STEP 5: HEM THE BOTTOM OF YOUR CURTAINS

At this level, you may maintain up your curtain and get a greater thought of the place you need them to fall. Mine finish about 1/4″-1/2″ above the ground. It’s your decision yours to softly drape throughout the ground or cling barely above. Both approach, I discovered it simpler to get my measurement at this level within the course of. I even connected one of many hooks and rings and held it on the rod.

STEP 6: INSERT YOUR PLEAT HOOKS TO CREATE YOUR PINCH PLEATS

This was truthfully the toughest a part of this entire course of. These guys are cussed and also you undoubtedly want a bit of elbow grease to get them to go in.

You’ve a number of choices right here – you will notice that your hooks have 4 prongs on them. To get the traditional pleat pinch look, you’ll need to insert all 4. You can too simply insert 2 or 3. Mess around with them and see which you want greatest!

I made a decision to go along with 4 and I’ve some tricks to make it a bit of simpler for you! The primary tip is to make use of a toothpick to assist open up the slits on the pleat tape. Particularly after ironing it to your cloth, the slits are going to be very flat. Simply insert a tooth choose and wiggle it forwards and backwards a bit. Should you nonetheless have a cussed slit, you may maintain the toothpick inserted when you insert the prong. Then simply slide the toothpick out.

The second tip is to insert the center two prongs first. Then insert the 2 outer ones. This made it a lot simpler than making an attempt to do all 4 proper in a row.

I used to be so excited once I turned my cloth round and noticed my first pinch pleat! It appeared so good! You might have to perform a little adjusting with the material to ensure it’s folded the appropriate approach, however for probably the most half, the hooks will do all of the be just right for you.

You can too resolve how a lot room you need to go away between every hook. If you’d like your pleats nearer collectively, do a smaller quantity. If you’d like them farther aside with extra cloth in between, then you may house them farther aside. I went with 2 empty slits between every hook.

STEP 7: HANG YOUR PINCH PLEAT CURTAIN

As soon as all of your hooks are connected, you may cling it up! With the kind of rings that I received, I counsel placing the rings on the curtain rod first after which hooking them onto the curtain.

I received the rod customized created from Pepe and Carols who additionally made the brass kitchen rail in our kitchen. The end is unlacquered brass and the rings I bought had been a reasonably shut match to that!

I’m not going to lie, I used to be tremendous impressed with myself and the way properly this turned out! I saved placing this mission off as a result of I used to be scared it was going to be laborious and take a very long time. Making my first curtain in all probability took an hour and half simply because I used to be figuring every little thing out and the second two had been undoubtedly beneath an hour.

And now we have now the proper resolution to hiding all our sneakers!

My pinch pleat curtains are a bit of extra whimsical and flowy, however if you happen to desire a extra outlined and crisp look then you may iron your pleats.

What do you assume? Will you strive making your personal no-sew pinch pleat curtains?

Associated